Product Code: PS12-1B

The PS12-1B, Linear Regulated Power Supply from Tactical Technologies has been designed to provide 12.1V DC nominal at 1A. Housed in a powder coated steel enclosure and supplied with an approved 16V AC 1A Plug Pack, PS12-1B has output short circuit protection via a 1A, M205 Fuse - if replacement is required, use only the correct fuse.

Product Code: PS13-1A

The PS13-1A, Linear Regulated Power Supply Module from Tactical Technologies has been designed to provide 13.8V DC at 1A. PS13-1A features an onboard battery charger with both AC Fail & Low Battery open circuit collector outputs. This module is supplied with 4 x adhesive mounting stand-offs and requires an approved 16V AC 1A Plug Pack (not supplied) Tactical Part No: 16VP/P. Output is short circuit protected with a 1A, M205 Fuse - if replacement is required, use only the correct fuse.

Product Code: PS13-1B

The PS13-1B, Linear Regulated Power Supply from Tactical Technologies has been designed to provide 13.8V DC nominal at 1A. PS13-1B features an onboard battery charger with LED indication to show the presence of DC. Housed in a powder coated steel enclosure (large enough to house a 1.2AH or 4AH Sealed Lead Acid Battery) and supplied with an approved 16V AC 1A Plug Pack, PS13-1B has output short circuit protection via a 1A, M205 Fuse - if replacement is required, use only the correct fuse.

Product Code: TPS12-10SWBD

The TPS12-10SWBD is a fully regulated, switch mode power supply providing 12.1 Volts DC at up to 10 Amps. Due to its switch mode design, the TPS12-10SWBD generates significantly less heat than equivalent supplies of linear design. Mounted in a powder coated steel, tampered enclosure, with a rear cutout allowing the cabinet to be mounted over a standard 240V GPO, the TPS12-10SWBD features very low noise at full load, with overload, short circuit and over voltage shutdown protection. A removable 6-way connector provides outputs for DC Load and Mains Fail Relay. The TPS12-10SWBD is factory fitted with a single Tactical Technologies PDM-1 (10 way) Heavy Duty Power Distribution Module to allow convenient connection (and individually fused protection) for up to 10 devices.

Product Code: TPS12-10SWBD20

The TPS12-10SWBD20 is a fully regulated, switch mode power supply providing 12.1 Volts DC at up to 10 Amps. Due to its switch mode design, the TPS12-10SWBD20 generates significantly less heat than equivalent supplies of linear design. Mounted in a powder coated steel, tampered enclosure, with a rear cutout allowing the cabinet to be mounted over a standard 240V GPO, the TPS12-10SWBD20 features very low noise at full load, with overload, short circuit and over voltage shutdown protection. A removable 6-way connector provides outputs for DC Load and Mains Fail Relay. The TPS12-10SWBD20 is factory fitted with a two Tactical Technologies PDM-1 (10 way) Heavy Duty Power Distribution Module2 to allow convenient connection (and individually fused protection) for up to 20 devices.

Product Code: TPS12-2.5

As with all 12V DC, 2.5 Amp power supplies in the Tactical range, the TPS12-2.5 incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS12-2.5 to excel where others fail.

Product Code: TPS12-2.5B

As with all 12V 2.5A supplies in the Tactical range, the TPS12-2.5B incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance & reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS12-2.5B to excel where others fail.

Product Code: TPS12-2.5BD

As with all 12V DC 2.5 Amp power supplies in the Tactical range, the TPS12-2.5BD incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS12-2.5BD to excel where others fail. Housed in a powder coated steel cabinet and supplied with front and rear tamper switches, the TPS12-2.5BD is factory fitted with a Tactical Technologies PDM (10 way) Heavy Duty Power Distribution Module.

Product Code: TPS12-5

As with all 12 V DC, 5 Amp power supplies in the Tactical range, the TPS12-5 incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS12-5 to excel where others fail.

Product Code: TPS12-5B

As with all 12V DC 5 Amp power supplies in the Tactical range, the TPS12-5B incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS12-5B to excel where others fail. Housed in a powder coated steel cabinet and supplied with front and rear tamper switches, the TPS12-5B may be ordered with factory fitted Tactical Technologies PDM (10 way) Heavy Duty Power Distribution Module (order Part No: TPS12-5BD)

Product Code: TPS12-5BD

As with all 12V DC 5 Amp power supplies in the Tactical range, the TPS12-5BD incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS12-5BD to excel where others fail. Housed in a powder coated steel cabinet and supplied with front and rear tamper switches, the TPS12-5BD is factory fitted with a Tactical Technologies PDM (10 way) Heavy Duty Power Distribution Module.

Product Code: TPS12-5BD-20

As with all 12V DC 5 Amp power supplies in the Tactical range, the TPS12-5BD20 incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS12-5BD20 to excel where others fail. Housed in a powder coated steel cabinet and supplied with front and rear tamper switches, the TPS12-5BD20 is factory fitted with Tactical Technologies PDM (20 way) Heavy Duty Power Distribution Modules.

Product Code: TPS13-10SWBD-10

The TPS13-10SWBD-10 is a fully regulated, switch mode power supply providing 13.8 volts DC at up to 10 Amps. Due to its switch mode design, the TPS13-10SWBD-10 generates significantly less heat than equivalent supplies of linear design. Mounted in a powder coated steel, tampered enclosure, with a rear cutout allowing the cabinet to be mounted over a standard 240V GPO, the TPS13-10SWBD-10 features very low noise at full load, with overload, short circuit and over voltage shutdown protection. A removable 6-way connector provides outputs for DC Load, Battery Charger and Mains Fail Relay. A separate Low Voltage Relay Output activates when battery voltage drops below 10.6V. The TPS13-10SWBD-10 is factory fitted with a single Tactical Technologies PDM-1 (10 way) Heavy Duty Power Distribution Module to allow convenient connection (and individually fused protection) for up to 10 devices.

Product Code: TPS13-2.5

As with all 13.8V DC, 2.5 Amp power supplies in the Tactical range, the TPS13-2.5 incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS13-2.5 to excel where others fail.

Product Code: TPS13-2.5B

As with all 13.8V 2.5A supplies in the Tactical range, the TPS13-2.5B incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance & reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS13-2.5B to excel where others fail.

Product Code: TPS13-2.5BD

As with all 13.8V DC 2.5 Amp power supplies in the Tactical range, the TPS13-2.5BD incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS13-2.5BD to excel where others fail. Housed in a powder coated steel cabinet and supplied with front and rear tamper switches, the TPS13-2.5BD is factory fitted with a Tactical Technologies PDM (10 way) Heavy Duty Power Distribution Module.

Product Code: TPS13-2.5E

As with all 13.8V DC, 2.5 Amp power supplies in the Tactical range, the TPS13-2.5E incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS13-2.5 to excel where others fail. Note that the TPS13-2.5E does not have AC Fail & Low Battery relay outputs - if these outputs are required, please use model TPS13-2.5

Product Code: TPS13-5

As with all 13.8V DC, 5 Amp power supplies in the Tactical range, the TPS13-5 incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS13-5 to excel where others fail.

Product Code: TPS13-5B

As with all 13.8V DC 5 Amp power supplies in the Tactical range, the TPS13-5B incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS13-5B to excel where others fail. Housed in a powder coated steel cabinet and supplied with front and rear tamper switches, the TPS13-5B provides sufficient space to accommodate a 12 V 7 Ah battery within the cabinet - even when sharing space with a GPO. The TPS13-5B is also available with factory fitted a Tactical Technologies PDM-1 (10 way) Heavy Duty Power Distribution Module - please order Part No: TPS13-5BD.

Product Code: TPS13-5BD

As with all 13.8V DC 5 Amp power supplies in the Tactical range, the TPS13-5BD incorporates ULDO (Ultra Low Drop Out) technology with substantial heat sinking and state-of-the-art linear design. Offering the same class leading performance and reliability of Tactical Technologies’ larger family of power products, you can depend upon the TPS13-5BD to excel where others fail. Housed in a powder coated steel cabinet and supplied with front and rear tamper switches, the TPS13-5BD is factory fitted with a Tactical Technologies PDM (10 way) Heavy Duty Power Distribution Module.

Product Code: TPS24-10BD

The TPS24-10BD 24v AC 10 Amp Power Supply has been designed to provide an off-the-shelf solution for CCTV and Access Control installations. There’s no longer any need to have banks of individual power supplies and multiple 240v power outlets to run your system. The TPS24-10BD has 10 individually fused outputs - each provided with a LED indicator to display the condition of the fuse, a handy feature for quick troubleshooting of cabling or camera faults. By selecting suitably rated fuses for each camera, you may configure your system to provide maximum short circuit fault tolerance - a short circuit on one cable run does not have to mean a failure of the entire system.