Product Code: TPC-1

The TPC-1 DC - DC / AC - DC Converter has been designed to convert either 24V AC or 20 - 48V DC to a reliable, clean output voltage between 11-15V DC (12V nominal) rated at 1.5A. Note: Input voltage must not exceed 48V DC - permanent damage may result. Featuring output over current, short circuit and over temperature protection, TPC-1 will automatically reset when the fault condition is rectified. Output voltage may be adjusted to 13.8V, allowing a 12V SLA (Sealed Lead Acid) battery to be charged via the in-built battery charger output terminals.

Product Code: TPC-3

The TPC-3 DC - DC / AC - DC Converter has been designed to convert either 24V AC or 20 - 48V DC to a reliable, clean output voltage 5V DC rated at 1.5A. Note: Input voltage must not exceed 48V DC - permanent damage may result. Featuring output over current, short circuit and over temperature protection, TPC-6 will automatically reset when the fault condition is rectified.

Product Code: TPS-BB-13

Have you ever installed a long cable run and found the voltage at the far end was too low to power the device? Or have you needed to power a 12V device and the only available power was 24V? Developed to provide a regulated 11V-16V DC output (adjustable), where input voltage ranges from 10V to 36VDC, the TPS-BB-13 Buck Boost Converter is the answer. If input voltage is either too high or too low at your equipment, the TPS-BB13 can automatically boost (increase) or buck (decrease) voltage to meet the device’s requirements. There is no effect on the output during the transition from buck to boost (or vica-versa). This module also features an on-board battery charging facility when the output is adjusted to 13.8V DC.

Product Code: TPS-BB-24

Have you ever installed a long cable run and found the voltage at the far end was too low to power your equipment? Or have you needed to power a 24VDC device and the only available power was 18V? Developed to provide a regulated 24V-27.6V DC output (adjustable), where input voltage ranges from 10V to 36VDC, the TPS-BB-24 Buck Boost Converter is the answer. If input voltage is either too high or too low at your equipment, the TPS-BB-24 can automatically buck (decrease) or boost (increase) voltage to meet the device’s requirements. There is no effect on the output during the transition from buck to boost (or vica-versa). This module also features an on-board battery charging facility when the output is adjusted to 27.6V DC.