Product Code: CLX2

MCM two channel radio receiver with 2 x dual button rolling code transmitters
Includes batteries

Product Code: CLX3

MCM three channel radio receiver with 2 x four button rolling code transmitters
Includes batteries

Product Code: CLX4

MCM four channel radio receiver with 2 x four button rolling code transmitters
Includes batteries

Product Code: CLXR

MCM four channel, relay output, rolling code receiver
Used with RC2, RC4, PIRW3, WSMOKE, WREED or WPANIC.
Transmitters are preprogrammed with one of 4 billion codes.
12Vdc operation and relay output

Product Code: DCT10

• 2 zone capabilities where each zone is independant and has its own serial number
• Zone 1 - One of two high sensitivity reed switches (magnet included)  (N.O/N.C)
• Zone 2 - Universal transmitter input (N.O/N.C)
• Wireless range in a typical residential environment: 35m with MG6130 / MG6160, 70m with MG5000 / MG5050 / RTX3
• Low battery and signal transmission LED
• Anti-tamper switch
• Dimensions: 12.4cm x 4.5cm x 3.3cm

Product Code: DCT2

• High sensitivity reed switch (magnet included)
• Wireless range in a typical residential environment: 20m with MG6130 / MG6160, 40m with MG5000 / MG5050 / RTX3
• Anti-tamper switch
• Dimensions: 4.4cm x 3.0cm x 1.9cm

Product Code: DCTXP2

• 2 zone capabilities where each zone is independant and has its own serial number
• Zone 1 - One of two high sensitivity reed switches (magnet included)  (N.O/N.C)
• Zone 2 - Universal transmitter input (N.O/N.C)
• Wireless range in a typical residential environment: 30m with MG6130 / MG6160, 60m with MG5000 / MG5050 / RTX3
• Low battery and signal transmission LED
• Anti-tamper switch
• Dimensions: 11.2cm x 3.2cm x 2.5cm

Product Code: EC301

DETECTOR FEATURES
Digital signal analysis for consistent detection throughout the coverage pattern
Digital temperature compensation for improved catch performance at critical temperatures
Patented Multi-Level Signal Processing (MLSP) provides more accurate detection of human IR energy over a broad range of temperatures
Vertical Beam Shaping (VBS) provides pet immunity up to 60 lbs (27 kg) available with EC300DP series
INSTALLATION FEATURES
Swivel-mount bracket for the ultimate in location and installation flexibility
Unique cover hinge allows unit to be installed right up to the ceiling
Quick release PCB, no more screws to lose
Concealed wiring channel simplifies installation and hides wires

Product Code: EVO ACM12

• 1 door access control module
• Transformer Sharing: Use one transformer to power multiple modules that have this feature
• Grant access via card and/or panel access code with the R915
• Arm with card and pin with the R915
• Connections for 1 door (card reader, REX, door contact and lock output)
• Connect only 4 wires between the reader and ACM412 module when using R910 or a R915 reader
• In-field firmware upgradeable via CONV4USB and WinLoad
• Automatic unlocking schedule
• Door Left Open and Door Forced Open options
• Door unlock and extended delay timers
• Unlock door manually with button or PGM event
• Unlock Door On Fire Alarm option
• Safe Mode option (during a communication loss, access control door connected to module can grant access to up to 4 specified cards or any valid access card)
• Built-in supervised 1.5A switching power supply
• Push button to activate or deactivate the Auxillary output
• Supports 4-wire and 26-bit Wiegand card readers
• Fits in a 20cm x 25.5cm x 7.6cm metal box
• Can be purchased as a board only or complete in box

Product Code: EVO C702

• Convenient credit card size
• Super-thin and flexible
• Vertical slot for clip attachment
• Durable PVC housing (white)

Product Code: EVO C704

• Key ring attachment
• Durable clear blue plastic housing
• Passive (no battery required)

Product Code: EVO C706

• Convenient crdeit card size
• Super-thin and flexible
• Vertical slot for clip attachment
• Durable PVC housing (white)
• Passive (no battery required)
• Suitable for high-quality photo ID printing

Product Code: EVO HUB2

• Divide the bus into two completely isolated outputs (if one output fails, the other will continue to function)
• One input port, 2 completely isolated output ports
• Each output port provides communications up to 900m

Product Code: EVO HUB4D

• One input port, 4 completely isolated output ports. Divides the bus into four completely isolated outputs (if one output fails, the others will continue to function)
• Each output port provides communications up to 900m
• Opto-isolated ports provide protection from high-voltage spikes
• In-field firmware upgradeable via bus at high speed (RS-485)
• DIN rail enclosure with removable terminals
• Supports 35mm DIN Rail mounting or wall mounting with retractable mounting clips
• On-board buttons to manually activate or deactivate each hub output
• 4-LED status display per hub output
• 3-LED module status display

Product Code: EVO K07C

• Upload photos or images using SD slot
• Supports any two colours (16-bit) for background and text
• Supports full colour screensaver display via integrated SD memory card
• Compatible with Imperial and Digiplex EVO
• Zone alarm display: the zones in alarm are shown until the alarm is disarmed
• Display the status of all partitions and all zones
• 1 built-in indoor temperature sensor
• 1 zone/temperature input. Connect a detection device or a TEMP07 external temp sensor
• Simple text driven menus with step by step guidance
• Alarm clock and special reminders
• Up to 15 tunes for use with door chiming, entry delay, exit delay and more
• Independently set chime zones
• 3 keypad-activated panic alarms
• Supports up to 8 built-in user selectable languages in three language sets
• Adjustable backlight, contrast and volume

Product Code: EVO K656

• Touch Sense keys with LED backlighting
• Streamlined, compact design
• Zone alarm display
• Simplified end-user remote control programming
• 32 character full graphic blue LCD screen
• Assign to one or more partitions
• In-field firmware upgradeable via Paradox inField Firmware upgrade software

Product Code: EVO LSN4

• Two way voice communication with monitoring station
• Continuous recording feature: Record up to a total of 120 seconds before and after an alarm event has occured. This recording can then be played back later by the monitoring station or user
• Connect up to four primary SUB1 substations per Listen-in module
• Page and/or communicate with other substations
• Arm, disarm or listen to the system status or to what is happening in protected areas all via telephone
• Record and enable personalised audio labels for up to 8 partitions and 8 users
• Can be connected to a music source such as a stereo to have background music play through the substations
• Voice announcement of system status during an alarm

Product Code: EVO NEware

• Supports internet(TCP/IP) communication. Requires IP100 internet module
• Program access codes and settings of all user codes in a EVO48 or EVO192 system
• Live system monitoring (view system and zone status and troubles) without interrupting central station communication or system operation
• Draw and download/upload up to 32 floor plans for Grafica
• Download images and tunes into Grafic for special events
• Arm/Disarm, bypass zones and control PGM's
• Search, sort and filter saved system events
• Generate and print customised reports
• Download floor plans, tunes graphics and screen savers into Grafica

Product Code: EVO R870

• Indoor installation only
• Up to 10cm read range with C702 ISO PosiCard
• Two status LEDs (red and green) and beeper
• Supports the 26-bit Weigand output format
• Screw terminals
• Covers single gang box
• Dimensions: 11cm (h) x 7.3cm (w) x 2cm (d)
• Material: UV resistant, ABS plastic
• Available in black or white

Product Code: EVO R885

• Extreme weather-resistant design
• Use as a keypad, reader or both
• Embedded 12-button keypad
• Up to 10cm read range with ISO card
• Programmable face light, LEDs and buzzer
• Panic alarm output
• User-selectable PIN
• Keypad lockout feature
• Reader supports 26 and 37 bit Wiegand
• Keypad: 8, 26 and 37 bit Wiegand, 4-bit with or without parity, and 4 bits buffered with or without parity

Product Code: EVO R890

• Extreme weather resistant design
• Up to 61cm (24") read range
• Wiegand, ABA and custom output formats
• Tricolour LED display
• Advanced SwiftRead Technology
• Elegant face light
• Supports the 26-bit Wiegand output format

Product Code: EVO R910

• Extreme weather-resistant design
• Up to 10cm read range with C702 Standard Proximity Card (Clamshell)
• Supports the RS-485 output format
• Tricolour LED display
• Advanced SwiftRead Technology
• Elegant blue face light
• In-field firmware upgradeable

Product Code: EVO R915

• 4 wire connection to ACM412
• Extreme weather-resistant design (injected rubber gasket and PCB cover)
• Adjustable red/green LED intensity and buzzer frequency
• Built-in keypad
• Tricolour LED display
• Available in 3 colours (White, silver and black)

Product Code: EVO RAC2

• Built-in access card. Present remote control to a reader like an access card
• Compact, water-resistant design with backlight for buttons
• Perform up to 6 different actions per remote control
• Built-in transceiver
• Two communication to and from receiver
• Press the status button at any time to receive the system status
• Displays system status using visual (LED) and auditory feedback

Product Code: EVO SUB1

• Connects to the LSN4 Listen-in module
• Comes with three buttons that allow the user to access functions like paging, background music and panic options
• Use the substation to communicate with the monitoring station and/or other substations
• Mute function allows you to mute background music and certain messages while still allowing alarm messages to be broadcast
• Volume control knob lets you set each substation to your desired level
• Additional substations can be addedd to function as speakers to improve the broadcasting of pages, system messages and background music

Product Code: EVO TEMP07

• External temperature sensor used to measure outside temperature to be displayed on the Grafica LCD keypad (K07C)
• Connects to the Grafica's temperature/Zone input
• Can be connected up to 30.5m from Grafica keypad

Product Code: EVO TM4

• Intuitive icon based user interface via touchscreen with quick menu-driven prompts
• 4.3 inch (10.9cm) brilliant and vivid widescreen colour display
• Compatible with EVO V2.16 or higher
• Customisable labels: Zones, areas, users, and PGM outputs
• Controls up to eight PGM outputs
• External SD media card slot for uploading custom themes and sounds, photos for use with slide show function, and for upgrading firmware
• Powerful FPGA processor
• 1 zone/temperature input. Connect a detection device or TEMP07 external temp sensor
• Customised translation done via web application
• Clean screen mode: locks screen for easy cleaning

Product Code: EVO ZX16D

• Compatible with EVO48 and EVO192
• Connects directly to Digiplex EVO 4-wire bus
• In-field firmware upgradeable via bus at high speed (RS-485)
• Supports 35mm DIN Rail mounting with removable terminals for fast, secure, orderly and economic installations
• 16 zone inputs
• 16-LED zone status display
• 3-LED module status display

Product Code: EVO ZX32D

• Compatible with EVO48 and EVO192
• Connects directly to the Digiplex EVO 4-wire bus
• Diagnostic Mode: Zone LEDs turn on/off to identify assigned zone inputs, verify correct wiring (no EOL, EOL without tamper, EOL with tamper) and perform a walk test
• In-field firmware upgradeable via bus at high speed (RS-485)
• Features 35mm DIN Rail mounting with removable terminals for fast, secure, orderly and economic installations
• 32 zone inputs
• Built-in 1.85A switching power supply
• Transformer sharing: modules can share a central AC supply (16 to 24Vac)
• Auxillary outputs providing up to 1A
• Button to manually activate/deactivate auxillary output (illuminates to show status)
• 32-LED zone status display
• 6-LED module status display
• Fully supervised (AC, battery, low battery and auxillary limit)
• Selectable battery charge current (350mA/850mA)

Product Code: EVO ZX4

• 4 addressable zones (8 with ATZ zone doubling feature)
• Set a different input speed for each zone (up to 255 minutes), which is ideal for temperature monitoring applications
• Use zone input as an anti-tamper switch input

Product Code: EVO ZX8D

• Compatible with EVO48 and EVO192
• Connects directly to Digiplex EVO 4-wire bus
• In-field firmware upgradeable via bus at high speed (RS-485)
• Supports 35mm DIN Rail mounting with removable terminals for fast, secure, orderly and economic installations
• 16 zone inputs
• 16-LED zone status display
• 3-LED module status display

Product Code: EVO192

• 8 on board zones (16 via DEOL)
• Expandable to 192 zones
• 32 access control doors
• 8 partitions
• 999 user codes
• 16 access levels/32 schedules
• 2048 Events buffer
• Up to 250 PGMs (2 on board)
• Listen in capabilities

Product Code: EVO48

• 8 on board zones (16 via DEOL)
• Expandable to 48 zones
• 32 access control doors
• 4 partitions
• 96 user codes
• 16 access levels/32 schedules
• 1024 Events buffer
• Up to 250 PGMs (2 on board)
• Listen in capabilities

Product Code: IC 8

8 Section keypad with white backlit keys

Product Code: IC 8V

MCM 8 section vertical style keypad with the white keys and backlighting.

Suitable for ICON8 panles

Product Code: IC16

16 Section keypad with white backlit keys

Product Code: IC16V

MCM 16 section vertical style keypad with the white keys and backlighting.

Suitable for ICON8 panles

Product Code: IC48

48 Section keypad with white backlit keys

Product Code: ICON 8

The Icon8 is a user friendly 8 input Control Dialler Panel.  It can configured to with up to 30 User Codes and operate from 5 keypads.

Product Code: ICON16

The Icon16 is a powerful 16 input Control Dialler Panel. 

It can be expanded up to 48 inputs and can report via Dialler and Securitel (using an MCM RS232 STU). 

It can also configured to control up to 6 Areas, with 80 User Codes and operate from 5 keypads. 

Product Code: ICON32

MCM 32 sector dialler panel with 6 areas and 80 user codes. Reporting in ADEMCO high speed or CONTACT ID

Product Code: ICON48

MCM 48 sector dialler panel with 6 areas and 80 user codes. Reporting in ADEMCO high speed or CONTACT ID

Product Code: ICON8GSMB

8 Section dialler panel with 30 user codes with a back-up GSM interface. Small enough to fit into ATM's. Supplied in metal enclosure with tamper switch, telephone lead, resistors, Antenna and ADSL filter

Product Code: ICONRX

8 Channel radio receiver
The ICONRX has outputs for 5 sensors, plus low battery, tamper & remote control
        on/off/panic

Used with with Icon8/16/32 & 48 panels

Product Code: ICONSTU - ATM

16 Section panel, with 6 areas and 80 user codes. A STU232 is pre-wired for securitel operation. Mounted in specially designed metalwork to fit into smaller spaces such as ATM's. Comes with ADSL filter

Note: not expandable when using this metalwork

Product Code: ICONSTU16

MCM 16 section panel, with 6 areas and 80 user codes. STU232 pre-wired for securitel operation. Comes with ADSL Filter. Expandable to 32 or 48 sections. Supplied in metal enclosure with tamper switch, telephone lead, manuals and resistors.

Product Code: IP100

• Report control panel events via IP to the Paradox IPR512 GPRS/IP Monitoring Receiver
• Receive notification of system alarms via email
• Control and monitor a control panel through an IP network (LAN/WAN/Internet)
• Compatible with Spectra SP series (V2.10 or higher), MG5000/MG5050 (V2.10 or higher) and EVO control panels
• Use NEware or Winload to access your system through the internet
• Arm/Disarm individual partitions via web browser
• View live status of all zones and partitions (i.e open/close, arm/disarm, troubles and alarms) via web browser
• DNS service available for dynamic IP address
• Supports SMTP and ESMTP (TLS/SSL not supported)
• Very low bandwidth consumption
• Data sent and received using 128-bit (MD5 and RC4) or 256-bit (AES) data encryption
• Two-way dynamic authentication

Product Code: IPR512

• 512 Supervised Paradox GPRS/IP Modules: High-speed supervision for up to 512 Paradox control panels using PCS200 GPRS or IP100 Internet Module.
• End-to-End Supervision: The entire communication line (control panel, internet module, receiver and automation software) is fully supervised and can be reported due to Paradox's proprietary encrypted communication
• Modue Polling and Receiver Supervision: Up to 32 security profiles can be created per receiver with a programmable Module Polling Time and Receiver Supervision Time (seconds, minutes or hours). If the receiver does not receive a presence message from the internet module within the Module Polling Time, the receiver will then wait until the Receiver Supervision Time elapses before reporting a supervision loss to the monitoring stations Automation Software.
• Direct communication: All reports are transmitted directly to the receiver from the PCS200 or IP100 modules without having to use intermediary servers or network operation centres. This provides faster response, with no concerns about issues from intermediary providers, such as signals not properly relayed or communication failures
• Redundant Internet Service Provider (ISP): 2 Ethernet ports (WAN1 and WAN2) to receive events through two different ISP's
• 2 Serial Ports: COM1 connects to Automation Software (used by monitoring station) by emulating Radionics 6500 protocol. COM2 connects to a printer or a PC with an RS232 serial communication software view/print events in plain text format
• Communication Protocols: Supports ADEMCO 685, SURGARD MLR2-DG, and RADIONICS 6500 for event reporting to the monitoring stations automation software
• Integrated Account Management Web page: access web page via LAN port to view, edit and delete PCS200/IP100 modules, edit security profiles, configure receiver, view receiver troubles and program special event report codes
• Data Backup on External Memory Card: The receiver has a built-in flash memory card slot for data backup (programmable intervals) and recovery. This allows fast and easy substitution of receiver units in crash recovery situations. Uses external SD, SD/HC or MMC memory cards
• Firmware Upgradeable:  The receiver is firmware uogradeable in less than 90 seconds and features automatic update verification
• Other features: Supports CID and SIA reporting formats. 256-bit AES encyption. 2-line, 40-character LCD with a 6-button interface to view troubles, backup data to/from memory card, set IP address and Subnet Mask for LAN port. Supports 19" rack mounting

Product Code: K10V

• 10 zone LED display
• StayD status LED
• Seperate Arm, Sleep, Stay and Off LED's per partition
• Patented Key light display (buttons light up to indicate an open zone)
• Adjustable backlight
• 2 partition keypad

Product Code: K32LCD

• Full graphic blue LCD with programmable labels
• Real-time zone alarm display (until disarmed)
• Menu driven programming for easy system setup (installer and end user)
• StayD status icon
• In-field firmware upgradeable via a 307USB and WinLoad
• Adjustable backlight
• 2 partition keypad

Product Code: K35

• Fixed message display that guides you in the operation of the system
• Displays the status of 32 zones in 2 partitions
• StayD status icon
• In-field firmware upgradeable via a 307USB and WinLoad
• Displays Arm, Sleep, Stay and Disarmed status for each partition
• Displays troubles, bypassed zones and alarm memory
• Adjustable backlight
• 2 partition keypad

Product Code: LC-100PI

• 15 meter wide angle coverage
• Digital signal analysis
• Pet immunity up to 25kg (55lbs)
• Quad Linear Imaging Technology for sharp analysis of body dimensions and differentiation from backgrounds and pets
• Advanced ASIC-based electronics
• Adjustable variable pulse count
• PIR sensitivity adjustment
• Height installation calibration free
• Form 'A' alarm contact and tamper switch

Product Code: LCD5511

• Large ICON LCD display:
• auto-scroll open and alarm zones
• 4 programmable function keys
• Clock display
• Large buttons
• Easily identified fire, emergency and panic buttons
• Integrated low temperature detector
• Built-in configurable input/output terminal

Product Code: LED5511z

• 4 programmable function keys
• 2 partition support
• dual FAP keys
• dual tamper support
• zone input
• backlit keys

Product Code: MG5000

• 2 on board Zones expanble to 4 via DEOL
• Built in 32 zone wireless transceiver 
• 32 User
• 2 Partitions
• 2-16 PGMs
• Voice communication option
• Internet communication option
• Wireless communication option

Product Code: MG5050

• 5 on board Zones expanble to 10 via DEOL
• Built in 32 zone wireless transceiver 
• 32 User
• 2 Partitions
• 2-16 PGMs
• Voice communication option
• Internet communication option
• Wireless communication option

Product Code: MG6160

• Hands-free speakerphone
• Two-way voice communication with moniroing station
• Built-in radio
• Built-in transceiver
• 32 Wireless zones
• Built-in 16 character LCD keypad with voice prompt
• high quality voice and sound
• Family message centre
• Alarm clock
• Voice, Utility and pager reporting
• Patented 2 opto coupler dialer circuit
• Access system menus remotely by telephone
• Receive system status 3 ways (LED's, LCD and voice)
• 57.6k baud communication with WinLoad
• 13.8Vdc, 200mA auxillary output
• Wall or desk mounting
• Chime zones
• 16 users and 16 remote controls
• 256 events buffered
• 2 on-board PGM outputs
• Built-in 90dB siren
• Includes 7.2V NiMH rechargeable battery pack
• Size: 21.8cm x 14.7cm x 3.6cm

Product Code: PC1565

Features

• 6 hardwire zones on main control panel 
• 8 keypad input zones (1 per keypad)
• 32 wireless zones using PC5132 wireless receiver
• Up to 12 Keypads
• up to 8 hardwired and 4 wireless keypads
• 3 hardwired keypads available

Product Code: PC1616

• 6 on board zones 
• Expandable up to 16 zones (max 1 x PC5108)
• 16 wireless zones using PC5132 wireless receiver
• Up to 8 keypads
  
• 2 partitions
• 32 users + master codes

Product Code: PC1864

• 8-64 Zone Control Panel
• 8 zones on main control panel
• Expandable  to 64 zones
• 8 partitions
• 500 event buffer
• 4 on-board PGM outputs:
• 32 users + master codes

Product Code: PC5108

PC5108- 8 Zone Expansion Module adds 8 hardwired general purpose burglary or fire zones provides 100mA @ 12VDC auxiliary current, PTC protected connect up to 1000' (305m) from control panel via KEYBUS module current draw : 35mA @ 12VDC Full NC/EOL supervison

Product Code: PC5132-433

• Wireless Receiver
• Supports 32/64 wireless zones, 16 wireless keys
• PC5132-433 is compatible with all PowerSeries control panels

Product Code: PCS200

• Report system events via GPRS to the Paradox IPR512 IP monitoring receiver
• Report system events via GSM to a landline monitoring receiver
• Upload/download with WinLoad or NEware via a GPRS connection. GPRS allows internet communications through a GSM (cell phone) network at data rates of up to 38.8Kbits/s
• Report systemt events via SMS to up to 16 cell phones. Each text messages contains event description, site name, date, time and any associated labels, such as area, zone and serial number
• Compatible with EVO/EVO192 (V2.02) and K641/K641R (V1.51), SP (V3.42) and K32LCD (V1.22) and MG series (V4.0)

Product Code: PDM75

• Digital Motion Detection
• Dual optics ( 2 dual opposed element sensors)
• Immune to animals weighing up to 40kg (90lb)
• Digital dual opposed detection
• digital Shield algorithm with adjsutable sensitivity
• Single or Dual Edge processing
• 11m x 11m with 90 degree viewing angle
• Wireless range in a typical residential environment: 35m with MG6130/MG6160, 70m with MG5000/MG5050

Product Code: PDM85

Same features as PDM75 plus a special weatherproof design:

• Available with one of three lenses: Pet Array, Horizontal Curtain Beam or Vertical Curtain Beam.
• Impact and temperature resistant casing
• Operates at -35 degrees C to +50 degrees C
• Casing lined with an injected rubber gasket
• UV protected lens
• Dual Optical filtering system
• Metal shield maximises protection from EMI and RFI signals
• Mulit-level sensitivity adjustment

Product Code: PDX-GS250

The Paradox Gpower GS250 is a 3D accelerometer device that continuously measures its position relative to ground. The idea behind the Gpower is to protect individual valuables, and not volume protection. The Gpower can be used as a 24-hour alarm monitoring device, providing constant protection without the need of arming your system. This is an excellent approach to protecting objects such as plasma TV’s, paintings and art, ATM machines, or in fact any valuable or asset that should not be moved. The Gpower is easily installed on any asset using three screws or adhesive tape.

Powerful signal processing software was developed specifically for the Gpower; it can analyse and reject most interference vibrations generated by speakers, dry wall, or anything else that can generate a vibration. The Gpower also offers a “partial movement mode” that allows a few seconds of movement (e.g., plasma TV’s on a swivel bracket) when the system is disarmed, thus reducing the possibilities of a false alarm. This mode is automatically disabled when your system is armed. The Gpower also offers two movement level detections – standard and high, for dry wall or concrete wall installations as an example.

Product Code: PGM4

• Compatible with E55/E65(V2.00), MG/SP(V3.00) and EVO
• 4 fully programmable 5A relay outputs
• De activate PGM after event and / or timer
• Pulse PGM output for fire alarms
• In-field firmware upgradeable

Product Code: PIRW3

Wireless passive infra red detector with tamper and low battery warning
Wall mount bracket and batteries included
For use with the MCM IconRx receiver

Product Code: PK5500

• Full 32 character programmable phrases
• global partition status
• 5 programmable function keys
• dual tamper
• enlarged keypad buttons
• adjustable backlight and keypad buzzer
• intuitive clock programming
• input/ouput terminal can be programmed to operate as a zone input or a progammable output

Product Code: PK5501

• Fixed-Message LCD Keypad
• Modern slimline, landscape keypad
• enlarged keypad buttons
• 5 programmable function keys
• dual tamper
• adjustable backlight and keypad buzzer
• intuitive clock programming
• input/ouput terminal can be programmed to operate as a zone input or a progammable output

Product Code: Power864

• 8-64 Zone Control Panel
• 8 zones on main control panel  
• expandable using hardwire, wireless, addressable modules and keypad zones  
• 8 partitions
• 256 event buffer
• 4 on-board PGM outputs:
• Expandable to 14 (PC5204, PC5208)
• Commercial fire version available:
• PC5020CF (comes with PC5700)
• Supports all PowerSeries modules

Product Code: RC2

MCM tow button rolling code transmitter.
Used with CLX2 receiver
Programmed with one of 4 billion codes
Includes batteries

Product Code: RC4

MCM four button rolling code transmitter
Used with CLX or IconRx
Preprogrammed with one of 4 billion codes
Includes batteries

Product Code: REM15

• Slim ergonomic design
• water resistant
• performs up to 5 different functions
• Wireless range in typical residential environment:                                                   30m with All-in-one consoles / RX1   45m with MG5000 / Mg5050   60m with RTX3

Product Code: REM2

• Supports StayD
• Built-in transceiver
• Displays system status using visual (LED) and auditory feedback
• Press the status button at any time to receive the system status
• Perform up to 6 different actions per remote control
• Compact, water-resistant design with backlight buttons
• Label to identify remote control owner
• Wireless range in a typical residential environment:                                                  30m with MG6130 / MG6160          45m with MG5000 / MG5050 / RTX3

Product Code: REM3

• Two user modes  (Keypad mode: Requires code entry.  Remote mode: One-touch arm and disarm)
• Supports StayD
• Built-in transceiver
• Provides visual and auditory feedback of actions performed
• Press the status button at any time to receive the system status
• Displays Arm, Sleep, Stay, or Off status of partition 1 and 2
• use keys to toggle up to 6 PGMs or generate a panic
• Includes key holder
• label to identify remote control owner
• Compact, water-resistant design
• 8cm x 3.4cm x 1.5cm
• Compatible with MG5000, MG5050, EVO, and Spectra SP when using an RTX3

Product Code: RFK5500

• Wireless receiver on board
• Full 32 character programmable phrases
• global partition status
• 5 programmable function keys
• dual tamper
• enlarged keypad buttons
• adjustable backlight and keypad buzzer
• intuitive clock programming
• input/ouput terminal can be programmed to operate as a zone input or a progammable output

Product Code: RPT1

• Built-in transceiver
• Extends the range of wireless communications
• Supports all Magellan transmitters (including 2-way transmitters)
• In-field firmware upgradeable via a 307USB and WinLoad
• Select which zone, PGM and/or keypad signals are repeated
• Signal strength display
• RF jamming supervision
• Fully supervised by panel or console
• 1 programmable 5A relay output
• Universal transmitter input (N.O/N.C)
• 75m Wireless range in a typical residentail environment
• Compatible with MG series, SP series with RTX3, Magellan Consoles
• AC input (16Vac, 20VA)
• Fits in 20cm x 25.5cm x 7.6cm and 28cm x 28cm x 7.6cm boxes   

Product Code: RTX3

• 32 Wireless zones
• Compatible with Spectra SP series, Digiplex, Digiplex EVO, and Imperial
• Maximum number of remote controls: 8 w/Esprit, 32 w/SP, 999 w/EVO and imperial
• Remote control compatibility: EVO / SP:  REM1, REM2, REM3, E-series / Stand-Alone: REM1
• Wireless PGM's (8 w/EVO and Imperial, 16 w/SP)
• Supports SR150 Wireless siren  (Spectra SP only)
• Functions with all Magellan transmitters including 2WPGM
• Supports two RPT1 and eight K32LRF / K37  (Spectra SP only)
• In-field firmware upgradeable via CV4USB, 307USB, and Winload
• RF jamming supervision
• Low battery, tamper and check-in supervision
• Transmitter signal strength display
• 3 PGM outputs and 1 optional output
• Noise level test indicator

Product Code: RX1

• Compatible with SP series control panels (V4.5 and higher)
• 32 wireless zones
• Maximum 32 remote controls
• remote control compatibilty: REM1 and REM15
• Transmitter compatibility: DC10, DCTXP2, DCT2, PMD1P, PMD75, PMD85, SD738
• In field firmware upgardeable via in field firmware upgarde software
• RF jamming supervision
• Low battery, tamper and check-in supervision
• Transmitter signal strength display
• 2 PGM outputs follow button 1 and 2 on REM1 / REM15

Product Code: SD738

• High sensitivity photoelectric smoke detector
• Built-in siren
• Wirelss range in a typical residential environment: 30m with MG6130/MG6160 or 60m with MG series/RTX3

Product Code: SP4000

• 4 Zones expanble to 8 via DEOL, or up to 32 zones via expansion
• 32 User
• 2 Partitions
• 2-16 PGMs
• Wireless expansion option
• Voice communication option
• Internet communication option
• Wireless communication option

Product Code: SP5500

• 5 Zones expanble to 10 via DEOL, or up to 32 zones via expansion
• 32 User
• 2 Partitions
• 2-16 PGMs
• Wireless expansion option
• Voice communication option
• Internet communication option
• Wireless communication option

Product Code: SP6000

• 8 Zones expanble to 16 via DEOL, or up to 32 zones via expansion
• 32 User
• 2 Partitions
• 2-16 PGMs
• Wireless expansion option
• Voice communication option
• Internet communication option
• Wireless communication option

Product Code: SP7000

• 16 Zones expanble to 32 via DEOL, or up to 32 zones via expansion
• 32 User
• 2 Partitions
• 2-16 PGMs
• Wireless expansion option
• Voice communication option
• Internet communication option
• Wireless communication option

Product Code: SR150

• Built-in Transceiver
• 100db wireless siren with integrated strobe light
• Weather-resistant design using a PC/ABS enclosure with UV protection and a silicone coated PCB
• Battery powered only, no need for AC power
• Fast alarm response time (4 seconds)
• 8 hour alarm display (strobe flashing every 4 seconds after bell cut-off)
• Siren presence supervised by control panel
• Panel presence supervised by siren (activates siren and strobe for 5 minutes if communication is lost)
• Triple tamper protection (screw removal, cover removal and removal from wall)
• Assign up to 4 sirens per control panel
• In-field firmware upgradeable Via 307USB
• Siren test mode
• 4-LED signal strength and status display
• Strobe lens available in 4 colours (red, blue, amber and clear)
• Fully powered using three 1.5Vdc type "D" alkaline batteries. Not required, but can also be powered using 8-16Vac/9-20vdc power supply.
• Dimensions: 24cm x 6cm x 18cm
• Compatible with MG5000, Mg5050 and SP series when using an RTX3

Product Code: STU232

Slave securitel reporting in securitel serial format. Interfaces to the alarm panel via RS232 communications protocol.

Used with MCM's ICON16/32/48 panles, Concept, ACD, and some C&K, and DSC panels

Product Code: STUT

Slave securitel reporting in securitel serial format. TTL interface to panel.

Used for TECOM Challanger and DAS NX range

Product Code: TM40

• 4.3" (10.9cm) brilliant and vivid widescreen colour display
• Intuitive, icon based interface via touchscreen, with quick menu driven prompts
• Customisable labels: zones, areas, users and PGM outputs
• Controls up to 8 PGM outputs
• External micro SD card slot for firmware upgrades and uploading of photos etc.
• Built-in indoor temperature sensor
• 1 zone or temperature input to connect a detection device or exterior temperature sensor (TEMP07)
• Compatible with EVO (V2.16 or higher), MG5000/MG5050, SP5500/SP6000/SP7000 (Version 4.72 or higher) and SP4000/SP65 (version 4.90 or higher)
• available in 3 finishes: Brushed aluminium, brushed black anodised, and white anodised.

Product Code: WLS904PL-433

Wireless Passive Infrared Detectors

Product Code: WLS912L-433

Wireless Glassbreak Detector
Based on the Acuity glassbreak detector

Tamper activated test mode:

Product Code: WLS925L-433

Wireless Door/Window Contact

Product Code: WPANIC

Wireless pendant panic button
Used with IconRx

Product Code: WREED2

Internal wireless door sensor with tamper and low battery warning
Used with IconRx
Includes batteries

Product Code: WS4939

Wireless Key

Product Code: WSMOKE

Wireless smoke sensor with low battery warning
Includes batteries
Used with IconRx

Product Code: ZX8

• Compatible with Spectra SP series, E55/65, MG5000, MG5050 and Digiplex / EVO
• 8 addressable zones (16 with ATZ zone doubling feature)
• Set a different input speed for each zone (up to 255 minutes). Can be ideal for temperature monitoring applications
• 1 PGM output
• Use zone input as an anti-tamper swicth input